

Water every drop
into the crop.
Drip, sprinkler and rain-pipe systems, garden pipe and fittings — built for Indian fields, priced at honest MRP, delivered through the dealer next door.
- 1,500+
- Dealers stock us
- 1.3L+
- Farmers served
- 5%
- GST on micro-irrigation
One honest price
MRP, tax included, same for everyone
Advice before you buy
Tell us your crop — we size it
Stocked by your dealer
1,500+ dealers nearby
Talk to a person
WhatsApp or call · Mon–Sat 10:00–20:00
Browse the range
Shop by category
Across the range
Something from every category
Find it faster
What are you growing?
Pick your crop — we'll point you at the method that suits it.
Not sure what to buy?
Tell us your crop.
We'll size it for you.
Send your field size and pump details. If a cheaper option does the job, we'll say so.
Ask on WhatsAppBuying in bulk?
Dealer and
contractor quantities.
Volume pricing on full-load orders, quoted against your list.
Request a quoteEasy on the budget
Best value in each range
The lowest-priced option in each category — often all the job needs.
Since 2007
Why people buy REDYPLAST
Made for these fields
UV-stabilised compounds, made in India, sold into Telangana and Andhra Pradesh for nearly two decades.
One honest price
Published MRP, inclusive of tax, identical for every buyer. No inflated list price to discount from.
A dealer near you
1,500+ retailers and dealers stock REDYPLAST, so support is local rather than a call centre.
Advice, not upsell
Tell us your crop and field size. If a cheaper size does the job, we'll say so.
Knowledge centre
Learn before you spend
Straight answers about irrigation — no sales pitch.
Both save water, but they suit different crops, soils and budgets. A plain comparison to help you pick before you spend.
12 May 2026 · 2 min read
Oversized pipe wastes money; undersized pipe starves your last sprinkler. How bore, distance and pump output fit together.
2 April 2026 · 2 min read
Most pipe does not fail — it is killed. Sunlight, sharp bends and bad storage account for most of the failures we see.
18 March 2026 · 1 min read
Questions
Before you buy
Are your prices MRP or dealer rate?
Every price on this site is MRP, inclusive of tax. It is the same for everyone — there is no separate dealer login or hidden rate. For bulk quantities, send a bulk enquiry and we will quote on volume.
Why is GST 5% on some products and 18% on others?
Micro-irrigation equipment — drip and sprinkler systems — attracts 5% GST under Indian tax rules. General plastic pipe and fittings attract 18%. The rate that applies is shown on each product page rather than assumed.
Do I have to buy a whole box of small fittings?
No. Small drip fittings such as joiners and end caps arrive boxed — 100 to a bag, for instance — but you order in pieces and can buy a single one. The box quantity and its price are shown alongside the per-piece MRP so you can see both, and any product with a genuine minimum order states it on its page and on its data sheet.
What size pipe do I need?
It depends on your pump output, the length of the run and your layout — not on the crop alone. As a rule of thumb, match the mainline to your pump outlet and step down for laterals, and err one size up on long runs. Send us your pump details and field dimensions on WhatsApp and we will work it through with you.
Do you deliver outside Telangana and Andhra Pradesh?
Our dealer network covers Telangana and Andhra Pradesh, and that is where we can promise fast delivery and local support. We do supply elsewhere — contact us with your location and quantity and we will tell you honestly what is possible.
How long does the pipe last?
That depends far more on how it is used than on the pipe itself. UV-stabilised pipe resists sunlight for years, but exposure, sharp bends and poor storage are what kill most lines early. Our maintenance guide in the knowledge centre covers what actually matters.

























