Sprinkler Irrigation

Impact Sprinkler Nozzle Brass 3/4"

impact sprinkler nozzle made from brass having threading size 3/4"

₹965 / piece

~~Was ₹1,206~~20% off · Bonalu special

Boxed 60 to a box · ₹57,900 the box

Offer price, inclusive of tax · 5% GST

Currently out of stock. Message us on WhatsApp and we’ll let you know when it’s back.

Get a price on WhatsApp Request bulk quote

Trusted since 2007 — 1,500+ dealers across Telangana and Andhra Pradesh
Pay online, or choose cash on delivery
WhatsApp support, Mon–Sat 10:00–20:00

Specifications

SKU: RDP-SP-NZ-BR-20
Model: RDP1701
Size: 3/4"
Operating pressure: 0.5-3.0 kg/cm2
Colour: golden
Material: brass
Minimum order: 1 piece
Boxed: 60 pieces to a box
Weight: 300 GRAM
Origin: Made in India

About this product

Impact Sprinkler Nozzle Brass is durable irrigation nozzle designed for efficient water spraying and long-term use. Made from high-quality Brass material, it offers excellent strength, rust resistance, and reliable performance under varying field conditions ensuring a fine and uniform water distribution across crops, lawns, and gardens. Its robust construction makes it ideal for agricultural and horticultural irrigation, providing consistent coverage, water efficiency, and easy maintenance for modern farming needs.

Key features

coverage are wide range
rust free
connection type threaded
leak proof
easy to use

Where it's used

Sprinkler irrigation of groundnut, pulses, wheat and fodder
Overhead watering on close-sown and broadcast crops
Portable sprinkler sets moved between plots
Germination and establishment watering

Benefits

Brass body and machined internals, so the wear surfaces last far longer than a moulded equivalent
Impact arm drive is mechanically simple — there is very little to fail and it can be freed in the field
Runs across a usable pressure band rather than needing one exact setting
Even distribution over a full circle, which is what stops the strips of dry ground a poor sprinkler leaves
Handles the slightly gritty water that farm bores actually deliver

Installation recommendations

Mount it truly vertical on the riser — a leaning sprinkler throws long on one side and short on the other, and that shows up as a dry crescent in the crop. Set the spacing so the wetted circles overlap; sprinklers are designed to be run overlapping, and spacing them to just touch leaves dry ground between. Check the arm swings freely before charging, and set pressure at the head rather than assuming it.

Downloads

Technical data sheetPDF ↓View

Reviews

No reviews yet

Be the first to review this product.

Reviews are checked by our team before they go live — yours could be the first one here.

From the knowledge centre

Drip or sprinkler: which one suits your crop?

Both save water, but they suit different crops, soils and budgets. A plain comparison to help you pick before you spend.

Before you buy

The sprinkler will not rotate.

Nearly always grit under the arm pivot or a bent arm spring, not a failed sprinkler. Stop the line, free and rinse the arm, and check it swings before blaming the unit. Persistent grit means the filter needs attention.

How far apart should they be spaced?

Close enough that the wetted circles overlap substantially — spacing to the edge of throw is what leaves dry patches. Wind matters more than the catalogue: on an exposed plot, close the spacing.

Brass or aluminium?

Brass for continuous seasonal use and gritty water — it wears far better. Aluminium is lighter to carry and cheaper, which suits a set that is shifted constantly by hand.

Why is GST only 5% on this?

Micro-irrigation equipment is taxed at 5% GST. General pipe fittings are 18%, so an order that mixes the two shows both rates on the invoice. The price you see already contains the tax.

Are your prices MRP or dealer rate?

Every price on this site is MRP, inclusive of tax. It is the same for everyone — there is no separate dealer login or hidden rate. For bulk quantities, send a bulk enquiry and we will quote on volume.

Why is GST 5% on some products and 18% on others?

Micro-irrigation equipment — drip and sprinkler systems — attracts 5% GST under Indian tax rules. General plastic pipe and fittings attract 18%. The rate that applies is shown on each product page rather than assumed.

Do I have to buy a whole box of small fittings?

No. Small drip fittings such as joiners and end caps arrive boxed — 100 to a bag, for instance — but you order in pieces and can buy a single one. The box quantity and its price are shown alongside the per-piece MRP so you can see both, and any product with a genuine minimum order states it on its page and on its data sheet.